Blanking & Cutting CNC Machinery Catalog

Metal Blanking & Cutting Production Equipment

Cutting and blank preparation is the first stage of the metalworking cycle. The dimensional accuracy, edge quality and absence of distortion at the blank preparation area determine the productivity of subsequent operations: bending, welding and CNC machining. Errors at the cutting stage lead to material overuse, scrap and additional time for finishing parts.

MACHENTECH has been the official importer and distributor of equipment from leading global manufacturers in Ukraine since 2012. We supply fiber laser cutting systems, band saws and cut-off machines, as well as CNC press brakes, and provide equipment selection, commissioning and service.

Blank preparation and cutting technologies in the met.ua catalog

This section covers equipment for cutting and bending sheet metal and profiles:

Fiber laser cutting of sheet metal

High-precision contour cutting of carbon and stainless steels, aluminum, brass and copper with a narrow heat-affected zone. Edge quality depends on the material, thickness, laser power and assist gas.

Cutting brass and copper requires a laser source with back-reflection protection.
Automation: sheet loading and unloading systems for multi-shift operation.

Laser cutting of tubes and profiles

Automated laser tube cutting machines with chucks for cutting holes, contours and end cuts on round, square, rectangular and special profiles.

Combined sheet and tube systems

A sheet cutting table and a rotary tube module on a single frame. A solution for workshops that need both types of cutting with limited floor space.

Band saws

Automatic and semi-automatic machines for cutting solid bars, thick-walled tubes, forgings and bundles of blanks.

Narrow kerf — less material lost to chips compared with circular and abrasive cutting.
Servo-controlled frame feed — stable cutting of difficult-to-machine steels and alloys.
Bundle cutting of tubes and bars in automatic mode.

Cut-off machines

Circular and special-purpose machines for fast cross-cutting of profiles, channels and angles, as well as for cutting high-pressure hoses.

CNC press brakes

Servo-electric and hydraulic press brakes for bending parts after cutting with high angle repeatability.

The servo-electric drive consumes energy mainly while the ram is moving, reducing energy consumption compared with hydraulics.
The crowning system compensates for elastic deflection of the ram and table, ensuring a uniform angle along the entire bend length.

How to choose the right technology

Task	Recommended equipment
Contour cutting of sheet metal	Fiber laser cutting machine for sheet
Holes and contours on tubes and profiles	Laser tube cutting machine
Sheet and tube cutting in one work area	Combined sheet and tube system
Cutting large solid bars, shafts, forgings and bundles	Band saw
Fast cross-cutting of profiles, angles and channels	Circular cut-off machine
Bending parts after cutting	CNC press brake

The final choice depends on the material, blank thickness and cross-section, accuracy and edge requirements, production volume and level of automation. MACHENTECH specialists will help you select equipment based on your drawings.

Benefits of upgrading your blank preparation area with MACHENTECH

Lower blank cost: high cutting speeds and optimized nesting reduce material waste.
Energy efficiency: fiber lasers and servo-electric press brakes consume less electricity than CO₂ lasers and hydraulic press brakes of a similar class.
Accuracy and repeatability: CNC control and automatic axis positioning reduce manual deburring and finishing.
Complete engineering support: MACHENTECH engineers design the process, install and commission the equipment and train your staff.

Service support and warehouses in Ukraine

MACHENTECH supports your equipment throughout its entire service life:

Warehouses in Kyiv, Dnipro and Lviv: machines, original optical components, nozzles, band saw blades, lubricants and cutting fluids.
Fast service: on-site service engineers for diagnostics and repair throughout Ukraine.
Operator training: hands-on CNC training for operators after commissioning.

Frequently asked questions about blank preparation equipment

How do I choose between laser cutting and a band saw?

A fiber laser is the best choice for contour cutting of sheet metal and thin-walled tubes. For cutting solid bars with a large cross-section, heavy shafts or forgings, a band saw is the more efficient solution.

Can I check the cutting and bending quality before buying?

Yes. We invite managers and process engineers to our showrooms in Kyiv, Dnipro and Lviv. Send us your drawings, and our engineers will produce test parts in your presence.

What warranty terms apply to blank preparation equipment?

Officially supplied equipment is covered by the manufacturer's warranty of 12 to 36 months, depending on the manufacturer and equipment type. Exact terms are specified in the supply contract.

Official importer MACHENTECH

Metalworking equipment sales department

Toll-free hotline in Ukraine: 0 (800) 40-77-88

E-mail for technical specifications and drawings: info@met.ua

Regional warehouses and showrooms:

Kyiv, Dnipro, Lviv

MACHENTECH engineering consultation

Need help selecting cutting equipment or producing a test part?

0 (800) 40-77-88

Telegram Viber WhatsApp

Selection of cutting equipment for your tasks, nesting optimization calculation, test part production and quotation.

Blanking and Cutting Production for Any Scale

Bodor Laser Aqu 1500 / 2000 / 3000 Handheld Laser Welding Machine

MEGA H-400S Automatic Servo Band Saw Machine

Bodor Laser A3T6 6000W Combined Sheet and Tube Laser Cutting Machine

Laser machine Bodor Laser C3 6000 W

Laser pipe cutter Bodor Laser K2

Bodor Laser P Series Fiber Laser Cutting Machine

CoastOne Bull 12 Servo-Electric Press Brake

Оптоволоконний верстат для лазерного різання Bodor Laser H3000

Автоматичний стрічкопильний верстат MEGA BS-250 HAS

Автоматичний стрічкопильний верстат MEGA H-400A

Відрізний верстат Finn-Power CM30

Електромеханічний листозгинальний прес CoastOne Bull 15

Metal Blanking & Cutting Production Equipment