Bodor Laser C3 6000W Fiber Laser Cutter: Buy

Enclosed Sheet Metal Laser Cutting

The Bodor C Series fiber laser cutting machine is designed for sheet metal cutting. The cutting zone is enclosed by a protective housing. The C3 model has a working area of 3048×1524 mm.

Working area	3048×1524 mm
Laser source power	6 kW
Positioning accuracy	±0.05 mm/m
Repeat positioning accuracy	±0.03 mm
Max. simultaneous axis traverse speed	[120 m/min — C3 V3.1 / 180 m/min — C3 V4.0]

Specifications are per the Bodor catalog. Actual configuration is per the supply specification.

Process Gases

Oxygen

For cutting carbon steels.

Nitrogen

For stainless steel, aluminum, and for carbon steel when an oxide-free edge is required.

Compressed Air

For thin sheets of various materials.

How to Choose a Gas

The choice depends on the material, sheet thickness, source power, and edge quality requirements. Cutting parameters are per the manufacturer's tables.

Construction

Protective Housing

The housing encloses the cutting zone. Operation is permitted only in accordance with the manufacturer's laser safety instructions.

Machine Base

A welded steel base with machined reference surfaces ensures resistance to vibration during operation.

Cast Aluminum Gantry

The cast aluminum gantry with a closed profile combines lower mass with sufficient rigidity. This improves the dynamics of cutting head movement.

Motion System

Rack and Pinion

Axis movement is driven via a rack-and-pinion transmission.

Linear Guides

Linear roller guides handle loads in four directions.

Laser System

Maxphotonics Source

The machine is equipped with a 6 kW Maxphotonics fiber laser source.

Non-Ferrous Metals

The ability to cut aluminum, copper, and brass, and the allowable thickness, depend on the source power and its protection against back reflection. Thicknesses by material are per the manufacturer's tables.

Bodor Genius Cutting Head

automatic focusing controlled by the machine's CNC system;
automatic focus position adjustment during cutting based on sheet thickness;
built-in dual water cooling channels for stable component temperature;
lens protection from overheating.

Control System and Software

cutting plan generation and nesting optimization to reduce waste;
support for common graphic formats;
automatic workpiece edge detection.

Auxiliary Systems

Cooling

The S&A [model] chiller has two cooling circuits and simultaneously cools the laser source and the cutting head. Power supply parameters, tank volume, and coolant type and quality are per the manufacturer's documentation.

Automatic Lubrication

Metered lubricant delivery at set intervals, level monitoring, and an alarm signal. The system maintains the stated accuracy and extends the service life of the guides and drives.

Xing Wong Extraction System

A centrifugal fan removes fumes and dust from the cutting zone. The filtration and exhaust scheme is determined by manufacturer requirements and local health and safety regulations.

Specification	Unit	Value
Travel ranges [X × Y × Z]	mm	X (table axis) 600 (+120 auxiliary travel)
	mm	Y (lower slide) 660 (+320 auxiliary travel)
	mm	Z 400
Travel ranges A × C	deg.	A ± 100° × C 360°
Working area X × Y × Z	mm	600 × 660 × 400
3-axis table \| 5-axis table	mm	750 × 650 \| Ø430
Distance between table and spindle	mm	max. 570
Workpiece weight \| Workpiece dimensions	kg \| mm	3-axis: max. 500 kg \| 750 × 650 mm × 400 mm height
Workpiece weight \| Workpiece dimensions	kg \| mm	5-axis: max. 200 kg \| Ø500 mm × 300 mm height on pallet
Overall dimensions W × D × H \| Weight	mm \| kg	2,100 × 3,600 × 2,900 mm \| 9,500 kg
Spindles	rpm	HSK-E40 – 42,000
Spindles	rpm	HSK-E50 – 36,000
ICS	-	Swivel joint included as standard equipment
Tool change system	-	51 / 96 / 197 magazine positions \| Tool length 260 mm
Traverse speed	m/min	60
Rotation speeds A/C	rpm	100
CNC system	-	Heidenhain TNC7, 24" touchscreen display
Workpiece machining automation	-	with external processing

Bodor Laser C3 6000W Fiber Laser Cutting Machine

Description